Products
LR-POE15
POE15(48V/24W)
Introduction
Specification
Accessories
Downloads
PoE power supply, PoE power supply module, LR-POE15
Model number: POE15 (48V/24W)
PoE power supply mode: power supply is the power supply; the power supply is not first detected by the end of the power supply.
IEEE802.3af/at PoE protocol: non - Standard
PoE feet: 4,5 (+), 7,8 (-)
Pin 1,2-TX: Dtad; 3,6-RX
Port speed: Mbps 10/100
LED indicator: PoE, Status Power
Network medium: 100BASE-TX: 5 and above non shielded twisted pair, EIA/TIA-568 standard
Output power: 48V/24W; instant Max: 30W
PoE15 shell port P0E power supply device for Ethernet power supply equipment, the POE power supply adaptation for indoor use, can work normally at 100vac to 240VAC input voltage, the power supply and the network terminal equipment between the category 5 cable connected with an Ethernet port, a data and power synthesis after the output port. The device can one Ethernet devices, such as routers, switches, wireless AP, telephone network, industrial network terminal, network cameras and other provide with POE power supply standard Poe application. Meet the power supply can not be used in remote areas or the use of Ethernet cable power supply way to improve the system reliability, simplify the installation of equipment to provide efficient solutions.
Main characteristics
The power supply has the function of the input over voltage, the output voltage, the short circuit protection and so on.
OCP = current protection over over current protection
OLP = load protection Over over load protection circuit
OVP = voltage protection Over over voltage protection
System reliability: MTBF > 8760 hours
Conducted interference (CE) and radiation interference (RE), in accordance with FCC, CLASS B EN60950 standard
Function characteristic
* can provide up to POE 48V/24W power supply
* to break the traditional way, through the Ethernet route not only can pass data can also transmit power
* power has input over voltage, output over-voltage, short-circuit protection and other functions of the output flow
Design of high security anti surge wave
* the transmission path is 100 meters long.
* easy to install, plug and play
| Model | PoE15 120100 | PoE15 150100 | PoE15 180100 | PoE15 240100 | PoE15 480050 |
| Port | 2PCS 10/100MAdaptive adjustment port | ||||
| 1 port supports PoE functionality | |||||
| Network medium | 10BASE-T: 4, 5, 3 kinds of non shielded twisted pair | ||||
| 100BASE-TX: 5 types and above non shielded twisted pair | |||||
| 1000BASE-TX：5 types and above non shielded twisted pair | |||||
| LED indicator | Power,PoE Status | Power,PoE Status | Power,PoE Status | Power,PoE Status | Power,PoE Status |
Size(L*W*H) | 90mm*45mm*35mm | ||||
| Working environment | Working temperature: 0 ~40 | ||||
| Storage temperature: -40 ~70 | |||||
| Working humidity: 10%~90% no condensation | |||||
| Storage humidity: 5%~90% no condensation | |||||
| Input source | AC 100V-240V ～50-60HZ | ||||
| Output power | 12W | 15W | 18W | 24W | 24W |
| Instantaneous maximum | 18W | 20W | 25W | 35W | 30W |
| POEAgreement | NON-802.3 | NON-802.3 | NON-802.3 | NON-802.3 | NON-802.3 |
| POEPin | 4,5+/7,8-Midsapn In the cross | /7,8 (+) 4,5 (-) Can be customized 1,2 (+), 3,6 (-) | |||
| Basic function | Compatible with the 802.3at/af IEEE standard (PD) | ||||
| Port power supply priority function (48V can be done with detection function) | |||||
| Forwarding rate | 10BASE-T: 14880pps/port | ||||
| 100BASE-TX: 148800pps/port | |||||
| 1000BASE-TX: 148800pps/port | |||||
